Door and windows frame pvc profile extruder / production line
Door / windows frame pvc wpc profile production line is used to produce pvc / wpc door frame profile.
WPC profiles extrusion lines have almost the same specifications , just different moulds,also the extruder can be changed smaller.
WPC profiles has many specifications,just like the picture:
Door / windows frame pvc laminated profile production line project evaluation:
According to your requirement, we’d like to recommend our SJZ65/132 PVC Profile Extrusion Line.
This extrusion line is co mposed of SJZ65/132 Conical Twin screw Extruder and downstream assistant
machine. Please check the below information:
Material characteristics
based material : PVC powder,CaCo3.
Additive : Coupling,Lubricant
Material form : All the material should be mixed completely.
Finished product : PVC Profile;
Output capacity : 150～200kg/hr (depending on finished product)
Basic Infrastructure ( Provided by customer )
a. Space for profile extrusion line in workshop:
About 22m (length)×2.5m(width)×3m(height) (Adjustable according to your factory. We ask you to show us
the design draw of your workshop).
b. Electricity network: 380V/60Hz (Adjustable according to your local voltage standard).
c. Wire/cables: wires/cables from customer’s general control cabinet to the main control cabinet for profile
extrusion line; all electrical cable from the main control cabinet to each machine.
d. Water supply: main water pipeline supply and water pipes to machines.
e. Means for lifting the machines when unloading and positioning.
f. Everything else not clearly mentioned above.
Here is a list of the Door / windows frame pvc profile extruder / production line equipment:
1, Automatic feeder
2, SJ65 / 132 conical twin screw extruder
3, Mould
4, Calibration platform
5, Haul - off
6, Cutter
7, Stacker ( tipping table )
Spare part
1, Mixer
2, Printer
3, Crusher
4, Mill
5, Drilling machine
6, Hot stamping machine
7, Embossing machine
8, Staning machine
Your message must be between 20-3,000 characters!
