50mm x 10m Flashing tape aluminium foil coated with bituminous adhesive
Alu Flashing Tapes
Description:
ALUMINUM FOIL TAPE, FLASHING TAPE, PEEL/STICK ROOF TAPE, Alu bitumen tape, Alu waterproof tape, sealing tape has a heavy aluminum facing together with an extra thick rubberized asphalt based adhesive system.
Aluminum flashing tape is recommended for most types of roofs, windows and flashing problems including:
- Trailers
- RV's
- Mobile homes
- Industrial buildings
- Roof awnings
- Truck Trailers
- Chimney Flashing
- Roof to Wall Flashing
- Ridge Flashing
- Window frames of glass, metal, plastic
- Wood including OSB
- Clay and Cement Roof Tiles
Aluminum flashing tape----Structure:
The specification of the tape consists of three layers,
Adhesive: Fexible modified bitumen adhesive compound.
Film backing: Aluminium foil
Interleaf: Antiadhesive Film Treated with Silicone
Aluminum flashing tape----Features:
- Aluminum backing is more moldable - it conforms better to irregular surface features - for weather-tight seals
- Excellent For Flashing
- No Messy Sealant
- Stays Flexible
- Aggressive Grip
- Superior Adhesion
- Assure Immediate Leakproof Results
- Easy, Fast Application
- No Harmful VOC’s
- Ideal Adhesive/Sealant Thickness
Aluminum Flashing tape----Application:
The surfaces to be sealed must be clean, dry and free of loose rust, scale, dust, talc and dirt. All oil, grease, silicone or other contaminates should be first removed with a suitable solvent/cleaner.
For older roofs use a stiff brush to remove all loose granules and surface elements.
Porous surfaces should be primed with a common asphalt based primer and allowed to dry before Xunda-T 700 is applied.
Install Xunda-T 700 by gradually peeling away the plastic release liner while rubbing the Xunda-T 700 to the surface.
Hint: prevent bubbles under the product by using your hand to squeegee out air by wiping your hand towards the roll as you set the tape to the surface.
Overlap seams or sealing are of application by 3 inches.
| Available in rolls |
Thickness : 1.0mm, 1.2mm, 1.4mm,1.5mm,2.0mm |
| 50 mm x 10m |
Temperature range: -20-90℃ |
| 100 mm x 10m |
Shelflife :maximum 2 years |
| 150 mm x 10m |
Reinforcement: polyester, fiberglass or without anything |
| 200 mm x 10m |
Appearance: No corcking Problems |
| 200 mm x 10m |
Packaging: individual roll with top and bottom label ,and the shrink film,then the carton and pallet |
| 225 mm x 10m |
Use:Repair or replace lead flashing roof felt repair |
| 250 mm x 10m |
|
| 300 mm x 10m |
|
Also 2.5 m,3.0 m, 5.0 m,1 0m,20 m length is availbale
Your message must be between 20-3,000 characters!
